from Civil to Inventor

The Autodesk enthusiast exile

Publish Content for Bolted Connection Part 4

Content Center Family Editing

We need to change some settings in the Content Center Family just written.  Navigate through he Content Center Editor to the new Family.  Right Click, and select the Family Table option.  The family parameters dialog will appear. 

The following are examples that I used, however you will undoubtedly have differences and variations at your company that need to be adopted.

image  Continue reading

Advertisements

November 17, 2008 Posted by | Bolted Connection Generator, Content Center, iParts | , , , , , , , , | Leave a comment

Publish Content for Bolted Connection Part 3

Content Center Category Review

We need do some snooping.  We need to know where we are publishing the content.  The Countersunk Bolts Category is our target.  It would be ideal to publish our content to the sub category of ‘Wood Screws’ but alas, this cannot be.  You see the Design Accelerator has a limitation (I’ve heard this before….limitations), in that it will not use content below a certain sub-category.

 image

The Bolted Connection Generator will only read from the Categories:

  • Countersunk
  • Hex Head
  • Hex Head – Flanged
  • Round Head
  • Set Screws

We cannot file our content appropriately and get the desired outcome.  Once again we have to hack up a beautiful landscape, but the benefits are worth it. (I am still convinced that I will find the directing XML, and modify the strings to go deeper.)

The publishing process will take our part, and store it with the iPart members as members of the new Content Center family.  The family will take on the properties of the parent category, and we need to know about that criteria.  We have to direct the publishing to map the iPart parameters to the appropriate category fields. 

Let’s take a look at the Category Properties for the Fasteners->Bolts->Countersunk sub-category.  You should see the list of data contained in the category, that gets passed down to the individual families contained therein.  It’s a form of inheritance.  Notice the Mapping field, and the Optional and Required options.  The required settings are brought in from the parent category, and cannot be left out of the mapping. Continue reading

November 13, 2008 Posted by | Bolted Connection Generator, Content Center, iParts | , , , , , , , , , | Leave a comment

Publish Content for Bolted Connection Part 2

Back to Part 1

iPart

iParts are method of creating Library Contents for similar parts. When you create an iPart, a table is placed in the part, that will contain the individual members of the library.  These members are contained in rows of the table, with the key differences edited for each member.

The table contains various fields that represent the parameters that shape the iPart members.  The iPart members can have identical values as needed, with the exception of 2 fields.  The Part Number and Member name.  A lot of care should be taken in planning the Part Number and Member names, as the future file name of library contents is tied to the Member Name, and the Part Number gets fed into the BOM.  However, the Content Center Editor can apply variables from the table to concatenate a Part Number automatically, which we WILL do later.  For now, we will prepare the table in the following fashion.

Under the Tools Menu, select Create iPart.

The iPart Author dialog will appear, revealing the structure and rows that will appear in the iPart table.  Currently there is only 1 row in the iPart table, seen at the bottom of the dialog. This row is fed from the current parameters contained in the part.

image  Continue reading

November 10, 2008 Posted by | Bolted Connection Generator, iParts | , , , , , , , | Leave a comment

Publish Content for Bolted Connection

bcg2 Everyone knows I love Design Accelerators, Content Center, User parameters, derived components…..Ok I just love Inventor.

The Bolted Connection Generator is a fabulous tool. It creates a filter criteria using diameters found in the selected thread type. It then uses that to filter the Content Center selection to create a list of fasteners.  The holes and recesses are created from geometry in the separate data.  The list of possibilities however, has some limitations.  I’d like to show you 1 way to get more productivity, working within the limitations. 

If I can get the job done with a Design Accelerator, then why would I want to prep everything without it?

This discussion is a workflow I performed recently to get some new fasteners into the Bolted Connection Generator.  Again, the theme has to do with wood, as I found a lot of people asking about wood, and little assistance was available. 

This workflow will take us through the following topics:

  • Thread.xls
  • Sample Part Modifications
  • iPart
  • Content Center Category Review
  • Component Authoring
  • Content Center Family Editing
  • Bolted Connection Generator

Continue reading

November 5, 2008 Posted by | Bolted Connection Generator, iParts | , , , , , , | Leave a comment

New Frame Generator Parts

We’ve Moved to http://johnevansdesign.net

October 21, 2008 Posted by | Design Accelerator | , , , , , , , | Leave a comment